How to clear Barrendale Mesa Secret Zone

The Secret Zone is the last hurrah on the planet! So this is how to clear the Barrendale Secret Zone!


THE ENTRANCE

You can buy the Barren Key in the Shop. It costs 11 Planet Coins. You get them by doing Side Quests.

The colourful door is right below the Barrendale Gate.

Entrance location on the map.
The Secret Zone entrance.

THE SECRET ZONE

Here at Barrendale Mesa it’s all about electricity. I’ll show you where and how you have to put the parts into the sockets and this Spark is yours in no time!
Let’s get familiar with the are first. There is a retracted bridge that needs power to get to the Spark. There are also two parts lying around on this top floor. A “T-Shaped” part and an “Angled” part.

The power flows up here. So, put the “T-Shaped” part into the slot with 3 lines and the “Angled” part into the socket with two lines. Like in the screenshot.

Two parts, two slots.
That’s how you put the parts into the slots.

Now take the pipe down.
On the middle floor, take the “Angled” part and put it into the slot that is closest to the white pipe.
Rotate the part so that the power flows. Like in the screenshot below.

Then take the pipe down to the bottom level. Here is another retractable bridge. We have to power this one first. Put the “T-Shaped” part into the slot with the three lines and rotate it so that the power flows through all three lines. Like in the screenshot below.

The angled part in the slot how it should be.
The T-shaped part in the slot how it should be.

Take the pipe up to the middle floor, pick up the “Straight” part and slide down to the bottom floor with it.
Here, you put it into the empty socket and the bridge is active.

Carrying the straight part, going to ground floor.
Put the straight part into the straight socket.

Still on ground floor, pick up the spare “Angled” part, cross the new bridge with it and go up the white pipe.
Up there is a socket. Put the “Angled” part inside. Then slide down the pipe again.

Going up with the angled piece.
Put it into the socket on middle floor.

It’s now time to get the power to the top bridge for the Spark!
On ground level, take the “T-Shaped” part out of the socket. Go up the pipe to the middle floor and put it into the empty socket with the three lines. Rotate it so that it fits.

Take the T-Shaped part out of the socket.
Use it in the socket on the middle floor.

The other socket on the middle floor still has the “Angled” part in it. Take it out and put it aside.
Slide down to ground floor and take the “Straight” Part out of the socket. Go up to the middle floor with it and put it into the socket where the “Angled” part was.

Take the angled part out of the socket.
And put the straight part from the bottom floor in.

The other socket on the middle floor still has the “Angled” part in it. Take it out and put it aside.
Slide down to ground floor and take the “Straight” Part out of the socket. Go up to the middle floor with it and put it into the socket where the “Angled” part was.

Take the angled part out of the socket.
And put the straight part from the bottom floor in.

The bridge to the Spark is now powered and you can go up to invite it to your team!


This is MARIO AND RABBIDS: SPARKS OF HOPE
Release: October 20th, 2022
Developer: Ubisoft Milan and Paris
Publisher: Ubisoft
Official Website: https://www.ubisoft.com/en-gb/game/mario-rabbids/sparks-of-hope
Guides by camzillasmom

Scroll to top