Here’s my easy guide for Rune Switch: Queen’s Gate. Step-by-step with all Rune Locations.
Rune Switch
First you need to get to the Rune Switch. It’s on the roof of a building in the southern part of Buttsville town. – The part with the broken bridge at the beach / harbour.
Look for the yellow paint to see where you need to climb and cross over to get to the roof.
When you activate the device, the three runes will disappear and glow in the distance either in red or green. You need to go to the the green rune, where you have to “Use” it and then to the next green rune and finally to the last rune before time is running out. You will hear a ticking in the background that will get faster and faster.
The runes will always go to the same spot and they never change the order. So, when you know where you have to go, just touch the device and run. Don’t wait until the runes have disappeared. See below the order of the runes and where they go.
Rune #1
The first rune glowing in green is not far – it’s east of the device. Jump off the device roof after you’ve touched it and look for the yellow paint markings, where you can climb the roof of the building.
“Use” the rune on top of the house. The next rune will activate in the north – north west. Also on a roof (see next rune).
Rune #2
The second rune is now glowing green in the north – north west of the first rune. Jump down and run to the house. You can jump onto the first roof from the side and then onto the smaller roof. Then “Use” the Rune to activate the last rune.
Rune #3
The last rune is now glowing near where the second catapult is in the story on top of a ruined building / gate.
Jump onto the ruins and “Use” the rune before time is running out. Then you’re done. Congratulations!
This is TINY TINA’S WONDERLANDS
Release: May 26th, 2022
Developer: Gearbox Software
Publisher: 2K Games
Official Website: https://playwonderlands.2k.com/
Guides by camzillasmom.
